TELL DUALCOM 2G.IN6.R6

- Remote monitoring communicator for fire alarm centers.
- It can be used for all fire alarm centers that have a contact output.
- Compatible with TELLMon, AMR-08 and Enigma II receivers.
- Contact controlled communicator.
- Simco SIM900 GSM module.
- Card independent.
- 900/1800 MHz GSM frequency.
- GPRS communication.
- SIA IP protocol (according to ANSI/SIA DC-09-2007 standard).
- Parallel use of two independent GSM modules.
- Providing simultaneous transmission on two independent GSM networks.
- Direct communication with the receiver.
- Forwarding to a maximum of 4 IP addresses.
- 2 primary IP addresses per network.
- 6 NO/NC/EOL contact inputs.
- 6 relay outputs activated upon alarm (NO contact).
- Automatic transmission path control can be set, test report sending frequency.
- Possibility to separate events.
- Programming software is included in the built-in USB flash drive.
- Supply voltage: 9-30 VDC.
- Current consumption: maximum: 400 mA.
- Operating temperature: -20°C to +70°C.
- Size: 116mm x 100mm x 25mm.
- Weight: 280 g.