HOLDPEAK 33D

Digital multimeter with LCD display suitable for measuring basic electrical units.

- Digital multimeter.
- Manual measurement limit switching.
- 3.1/2 digit LCD display with backlight.
- Automatic backlight switch-off.
- Maximum value display: 1999.
- Polarity-independent measurement (in case of reversed polarity - display).
- Low battery voltage indication.
- Keeping the last measured value on the display.
- VDC measurement range/display resolution/accuracy:
- 200mV / 0.1mV / +/-0.5%.
- 2V / 1mV / +/-0.5%.
- 20V / 10mV / +/-0.5%.
- 200V / 100mV / +/-0.8%.
- 600V / 1V / +/-1.2%.
- Input resistance in VDC measurement mode: 1Mohm.
- Overvoltage protection.
- VAC measurement range/display resolution/accuracy:
- 200V / 100mV / +/-1.2%.
- 600V / 1V / +/-1.8%.
- AC voltage frequency range: 40Hz-400Hz.
- Input resistance in VAC measurement mode: 1Mohm.
- ADC measurement range/display resolution/accuracy:
- 200uA / 0.1uA / +/-1%
- 2mA / 1uA / +/-1%.
- 20mA / 10uA / +/-1%.
- 200mA / 100uA / +/-1.5%.
- 10A / 10mA / +/-3%.
- Overcurrent protection with internal 250mA fusible fuse (exception 10A measurement limit).
- Resistance measurement range/display resolution/accuracy:
- 200ohm / 0.1ohm / +/-1.5%.
- 2kohm / 1ohm / +/-0.8%.
- 20kohm / 10ohm / +/-0.8%.
- 200kohm / 100ohm / +/-0.8%.
- 2Mohm / 1Kohm / +/-2%.
- Transistor hFE testing.
- Measurement of NPN and PNP transistors.
- HFE range: 0-1000.
- Test voltage/current: Ib=10uA/Vce=3V.
- Diode test, 1mV resolution.
- Tear test with sound signal.
- Measuring tape.
- Power supply: 9VDC from 6F22 battery.
- Operating temperature: 0°C-40°C.
- Operating humidity: maximum 85%.
- Dimensions: 143mm x 75mm x 32mm.
- Weight: 200g (with battery).
- CE certification.