- GSM frequencies: TDD-LTE B38/B40/B41, FDD-LTE B1/B3/B5/B7/B8/B20, WCDMA/HSDPA/HSPA+ B1/B5/B8, GSM/GPRS/EDGE 900/1800 MHz.
- It is network independent and works with a SIM card from any service provider.
- An analog telephone line can be looped into a network.
- Provision of a full-value simulated line via the GSM network in the event of termination of the landline telephone line.
- 8 phone numbers to be notified can be programmed.
- The type of notification can be programmed per phone number.
- 2 contact controlled inputs.
- SMS, voice call and Contact ID transmission to the user and/or remote monitoring in case of an incoming signal.
- Generation and transmission of SMS messages from Contact ID codes to users (25 events and 250 programmable zones).
- A voice message can be a siren sound or a pre-recorded voice message.
- Duration of basic text: 16 seconds.
- Notification event: input alarm, supply voltage monitoring and vital sign sending.
- Individual SMS settings for alarm events.
- Programmable ring time, number of call repetitions and ringing.
- 1 open collector (OC) output (with a maximum load capacity of 30 V / 400 mA).
- The output can be controlled with a free voice call.
- 1000 phone numbers can be programmed in the case of control with phone number identification.
- The output can be monostable or bistable.
- In monostable state, the timing duration can be a maximum of 65000 seconds.
- If a device interfering with the GSM signal is detected, try to send the signal on the analog line, or you can activate the output.
- It can be programmed via SMS, voice menu, Android (Bluetooth) or PC (USB and Bluetooth) with the ProRead software.
- For programming via a computer, a ProUSB Kit or a Bluetooth adapter is required (not included).
- Hourly logging of GSM field strength.
- Forwarding SMS messages received on the SIM card to a pre-programmed phone number.
- Sending a warning message about the expiry of the SIM card.
- Storage of 16000 events.
- An optional PRO Battery can be connected (not included).
- External GSM stick antenna with SMA connection.
- It can be easily installed even in the smallest places.
- Supply voltage: 9-20VDC.
- Standby current consumption: 80 mA.
- Maximum current consumption: 1000 mA.
- Operating temperature: -20°C to +50°C.
- Dimensions: 86mm x 69mm x 25mm.