The E16 alarm relay, an IP-based Ethernet communicator, can work with Paradox, DSC, Pyronix, UTC Interlogix (Caddx), Innerrange, Honeywell and Texecom, Crow alarm centers, communicating directly with the data bus (DATA BUS) or serial port (SERIAL PORT).

- An IP-based relay device that communicates via wired Internet and Ethernet, and is compatible with popular alarm centers of major manufacturers.
- In a unique way, the communicator can be connected not to TIP RING (PSTN), but to the data bus or, in some models, the serial port, so message reading and transmission takes less than a second.
- The owner is informed about the events of the alarm system in the free Protegus Mobile / Web application.
- Free Protegus server, so neither Fixed IP nor Dynamic DNS is required.
- The module transmits the messages of the marked systems to the remote monitoring on an IP basis in Contact ID code format.
- 3 access levels for configuring and managing the module: Administrator, Installer, User.
- Quick and easy configuration via USB or after initial setup remotely using Trikdis configuration software.
- 3 flexibly selectable contacts, which can be both input and output.
- RS485 port for remotely monitoring sensors or other compatible devices.
- In case of loss of connection of the primary channel, automatic switch to the second security channel.
- Arming / disarming the entire system or one of the partitions using the user code.
- Sensing the status of zones.
- Zone elimination.
- Automatic partition and zone mapping.
- PARADOX: SP4000, SP5500, SP5500+, SP6000, SP6000+, SP7000, SP7000+, SP65, 1727, 1728, 1738, MG5000, MG5050, MG5050+, MG505E, EVO48, EVO192, EVOHD, NE96, EVO96, E55, 728 ULT, 738ULT.
- DSC: Power Series: PC585, PC1404, PC1565, PC1616, PC1832, PC1864, PC5015, PC5020.
- PYRONIX: Matrix Series: MATRIX 424, MATRIX 832, MATRIX 832+, MATRIX 6, MATRIX 816.
- UTC Interlogix: NetworX (Caddx) NX-4v2, NX-6v2, NX-8v2, NX-8e.
- Texecom: Premier 24, 48, 88, 168, Premier Elite 12, 24, 48, 64, 88, 168.
- Innerrange: Inception.
- Honeywell: Ademco Vista-15, Ademco Vista-20, Ademco Vista-48.
- Crow: Runner 4/8, 8/16.
- Transmission channel: LAN / IP communication.
- Ethernet port: IEEE802.3, 10 Base-T, port RJ-45.
- Supported protocol: TCP/IP, UDP/IP.
- Alarm center connection: Data bus or Serial port.
- Event transmission: Contact ID code.
- Encryption protocol: TRK, DC-09_2007, DC-09_2012.
- IP-based signaling for remote monitoring: Yes.
- Event log / number of stored events: Yes, 100 events.
- Periodic test report sending: Yes.
- Alarm limitation: Yes.
- RS-485: Yes.
- Dual function contacts (output or input): 3.
- Configurable inputs: NO, NC, EOL.
- Loop resistance: 2200Ω.
- Dual function contacts (output or input): 3.
- Type of outputs: OC type, 30V, 500 mA.
- Control: Mobile application, browser.
- Programming method: USB, IP.
- Programming software: Yes.
- Remote programming: Yes.
- Protegus users: Unlimited.
- Mobile App: Yes.
- Web application: Yes.
- Push notification: Yes.
- Operating environment: -10 ºC to +50 ºC, relative humidity max 80% at +20°C.
- Supply voltage: 10-16VDC.
- Current consumption (maximum): 250 mA.
- Current consumption (nominal): 100 mA.
- Packaging: Plastic.
- Terminal design: Can be connected.
- Dimensions: 88mm x 62mm x 26mm.
- Weight: 80g.