Digital multimeter with LCD display suitable for measuring basic electrical units.

- Digital multimeter.
- Instrument category class: 600V CAT III.
- Manual measurement limit switching.
- 3.1/2 digit LCD display with backlight.
- Automatic backlight switch-off.
- Maximum value display: 1999.
- Polarity-independent measurement (in case of reversed polarity - display).
- Low battery voltage indication.
- Keeping the last measured value on the display.
- VDC measurement range/display resolution/accuracy:
- 2V / 1mV / +/-0.5%.
- 20V / 10mV / +/-0.5%.
- 200V / 100mV / +/-0.5%.
- 600V / 1V / +/-0.8%.
- Input resistance in VDC measurement mode: 1Mohm.
- Overvoltage protection.
- VAC measurement range/display resolution/accuracy:
- 200V / 100mV / +/-1.5%.
- 600V / 1V / +/-1.5%.
- AC voltage frequency range: 40Hz-400Hz.
- Input resistance in VAC measurement mode: 1Mohm.
- ADC measurement range/display resolution/accuracy:
- 200uA / 0.1uA / +/-1.2%
- 2mA / 1uA / +/-1.2%.
- 20mA / 10uA / +/-1.2%.
- 200mA / 100uA / +/-1.2%.
- 10A / 10mA / +/-2%.
- Overcurrent protection with internal 250mA fusible fuse (exception 10A measurement limit).
- Resistance measurement range/display resolution/accuracy:
- 200ohm / 0.1ohm / +/-1%.
- 2kohm / 1ohm / +/-1%.
- 20kohm / 10ohm / +/-1%.
- 200kohm / 100ohm / +/-1%.
- 2Mohm / 1Kohm / +/-1.5%.
- Temperature measurement range/display resolution/accuracy:
- -20°C - +150°C / 1°C / +/-3% + 1 digit.
- 150°C-1000°C / 1°C / +/-3.5% + 2 digits.
- Battery test measuring range/display resolution/accuracy/load current:
- 1.5V / 1mV / +/-5% / approx.
- 9V / 10mV / +/-5% / approx.
- Diode test, opening current: approx.
- Tear test with sound signal.
- Measuring range: 90 VAC - 1000 VAC rms.
- Voltage detection signal with sound and light signal.
- Measuring tape.
- K-type thermal element sensor probe.
- Power supply: 9VDC from 6F22 battery.
- Operating temperature: 0°C-40°C.
- Operating humidity: maximum 85%.
- Dimensions: 150 mm x 106 mm x 43 mm.
- Weight: 240 g (with battery).
- CE certification.