You can transmit the events of alarm centers with communicators to the remote monitoring station via GSM/GPRS network and/or receive SMS messages about the events of your system to up to 5 mobile phone numbers.

- 4-band GSM call station (850/900/1800/1900MHz).
- Design that can be connected to an analog telephone line.
- It can be set to automatically switch to GSM/GPRS communication when the analog telephone line is interrupted.
- It can be connected to the analog telephone input of the alarm center communicator.
- Transmission of system events via the GSM network to a remote monitoring station.
- Supported communication formats: Contact ID, 4+2, Scancom, SIA IP, Kronos, EGR100.
- Transmission of system events via SMS to a maximum of 5 phone numbers.
- The text of the report codes and corresponding messages can be programmed.
- 3 user-controllable outputs and inputs.
- 3 digital inputs with low-level (negative) start (requires NO contact).
- 3 open collector (CO) outputs (30V/50mA).
- Programming via computer with ELDES ConfigTool software.
- USB connection to the computer.
- Remote programming with DTMF codes.
- Transmission methods: Remote monitoring and SMS, only Remote monitoring, SMS only.
- LED status display (field strength, operation, communication).
- Generated line voltage: 18V.
- Generated line current: 25mA.
- Generated line impedance: 600ohm.
- Generated dial tone frequency: 350Hz.
- External GSM antenna connection (SMA).
- Adhesive external GSM antenna with 3m cable.
- Panel-level, built-in packaging.
- 4 plastic panel fixing pins.
- Supply voltage: 10-24VDC.
- Maximum current consumption: 300mA.
- Operating temperature: -20°C to +55°C.
- Dimensions: 130mm x 73mm.