High-quality, two-beam, photoelectronic infrared barrier.

- Two-beam, photoelectronic sensor.
- It can be used both indoors and outdoors.
- Range indoors: 60m.
- Range outdoors: 30m.
- Scattering distance of infrared rays at 30m: 0.9m.
- Recommended installation height: 0.8m-1m.
- Horizontal adjustability of lenses: +/-95°.
- Vertical adjustability of lenses: +/-10°.
- Adjustment is done visually, through a mirrored inspection hole.
- Calibration, fine-tuning: with a multimeter and based on LED feedback.
- Adjustable reaction time: 50ms-700ms.
- Status and error LED.
- Voltage-free relay output with NO/NC contact (maximum 30VAC/VDC - 1A).
- Relay operating time upon detection: 1s-3s.
- Tamper switch with NC contact (only in the receiver).
- Weatherproof phenolic resin housing.
- It can be installed vertically, horizontally and on an inclined plane.
- Mounting clamp, for pole mounting (pole diameter: 38mm-48mm).
- Supply voltage: 10.8VDC-25VDC (polarity independent).
- Current consumption: maximum 57mA.
- Operating temperature: -20°C to +60°C.
- Dimensions: 63mm x 163mm x 75mm.
- Weight: 330g (receiver), 315g (transmitter).
- CE certification.