| |||
S-GSM 4Universal GSM module, call and SMS sending unit, 4 inputs / 1 (2) outputs, antenna.Security systems / Communicators, GSM / S-GSMEnd user price - Reseller price- It can also be used independently as a center (Arming/Disarming: Free call, SMS). - You can also send your inputs to remote monitoring in ContactID format (in parallel with the customer notification). - Customer notification: SMS, Voice call (siren sound or 4x8 second recorded voice message). - PC programming with a simple user interface, USB cable. - 4 starting inputs (NO or NC contact). - 1 relay output DC24V/1A (can be expanded to 2 outputs with an extension panel). - Output functions: monostable, bistable, siren control, arming/disarming status. - 8 programmable phone numbers. - Option to send SMS (programmable SMS text). - VOICE call with siren sound or programmed text (separate text for each input). - Power monitoring, sending an alarm for low input voltage. - Li-polymer, internal battery for greater safety (24h-48h standby time). - The internal battery has a molex connector and can be easily replaced (battery not included). - Tamper protection with tamper switch. - When the cover is closed, the LEDs can be switched off (do not disturb the user in the dark). - Relay control or arming/disarming (e.g. door opening) when an incoming call number is identified. - The inputs can be armed/disarmed (alarm center function). - Industrial design, compact size. - Plastic box mounted, cased design. - It can be programmed from a PC, the main functions can also be programmed remotely via SMS. - Simple PC programming interface. - SMS programming is protected by a security code. - Vital sign transmission at a set time, with an adjustable cycle time. - SMS redirection function (balance notification redirection). - Automatic restart in case of network failure. - Status query via SMS (inputs, arming, power monitor). - You can also send SMS about status resets (e.g. power reset). - Adjustable ring time. - Confirmation for phone recording. - Round call function (everyone must acknowledge). - A programming cable is required for PC programming (an old Wilarm cable is also good). - PC software. - Power supply: 10VDC-18VDC. - Current consumption in standby mode: 20mA, during alarm: 300mA. |