S-GSM 1

- It can also be used independently as a center (Arming/Disarming: Free call, SMS).
- You can also send your inputs to remote monitoring in ContactID format (in parallel with the customer notification).
- Customer notification: SMS, Voice call (siren sound or 4x8 second recorded voice message).
- PC programming with a simple user interface, USB cable.
- 4 starting inputs (NO or NC contact).
- 1 relay output DC24V/1A (can be expanded to 2 outputs with an extension panel).
- Output functions: monostable, bistable, siren control, arming/disarming status.
- 8 programmable phone numbers.
- Option to send SMS (programmable SMS text).
- VOICE call with siren sound or programmed text (separate text for each input).
- Power monitoring, sending an alarm for low input voltage.
- Relay control or arming/disarming (e.g. door opening) when an incoming call number is identified.
- The inputs can be armed/disarmed (alarm center function).
- Industrial design, compact size.
- Panel-level packaging, can even be installed in the central box of the alarm system.
- It can be programmed from a PC, the main functions can also be programmed remotely via SMS.
- Simple PC programming interface.
- SMS programming is protected by a security code.
- Vital sign transmission at a set time, with an adjustable cycle time.
- SMS redirection function (balance notification redirection).
- Automatic restart in case of network failure.
- Status query via SMS (inputs, arming, power monitor).
- You can also send SMS about status resets (e.g. power reset).
- Adjustable ring time.
- Confirmation for phone recording.
- Round call function (everyone must acknowledge).
- A programming cable is required for PC programming (an old Wilarm cable is also good).
- PC software.
- Power supply: 10VDC-18VDC.
- Current consumption in standby mode: 20mA, during alarm: 300mA.