- Built-in 868MHz frequency transceiver.
- Range: maximum 70m.
- Compatible control panels: MG/SP series from V4.0, MG6130/6161 from V3.0.
- Compatible receivers: RTX3 V1.5, K32LCD V1.3.
- Compatible with older MG5000, MG5050 and SP hubs when used with RTX3 module.
- Flasher glass: red.
- Siren sound pressure: 100 dB.
- Built-in strobe light indicator.
- Weatherproof design, in a PC/ABS housing, with UV protection and silicone-coated PCB board.
- Operates exclusively on batteries, no AC power supply required.
- Fast alarm response time (4 seconds).
- 8-hour alarm display (the flashing light flashes every 4 seconds after the siren is disabled).
- The presence of the siren is monitored by the center.
- The presence of the center is monitored by the siren (the siren activates and flashes for 5 minutes when communication is lost).
- Triple tamper protection (for screw, cover removal, wall removal).
- 4 sirens can be ordered for one center.
- On-site firmware upgradeability, using 307USB.
- Siren test mode.
- 4 LED signal strength and status display.
- Full power supply from three 1.5VDC “Dcol type alkaline batteries (supplied).
- Expected battery life in general use: 3 years.
- It is not necessary, but it can also be powered from an 8-16VAC / 9-20VDC power supply.
- Standby current consumption: 22uA.
- Maximum current consumption: 550mA.
- Operating temperature: -30°C to +50°C.
- Dimensions: 24cm x 6cm x 18cm.