- New generation alarm system, with useful and practical new solutions and new possibilities.
- It is extremely user-friendly, easy and understandable to program and operate.
- 6 freely programmable zones.
- 1 Micron MX-900 icon LCD operator.
- Built-in communicator, signal for remote monitoring.
- Connectable LED operator, LCD operator, NiteWatch, remote control, key switch.
- 4 operators plus 1 remote control module can be connected at the same time.
- Programming can be done with an LED or LCD operator or from a PC with the MicroCom software.
- Memory Chip can be connected to upload and download complete programs (cloning).
- It can transmit a signal tone to phone numbers that can also be set by the user, in the event of an alarm.
- Alarm signal for telephone devices: siren sound and sound signal of the starting zone number.
- 10 different freely programmable zone types.
- Immediate, 24-hour, night, entry-delayed, alternative, tracking, intelligent, auto-eliminating.
- Separately programmable exit and entry delays, alternative entry delays.
- Next zone: if the first violated zone is delayed, these zones will be as well.
- Automatic zone exclusion: the zone can be excluded after a certain number of detections.
- Smart zone: alarm only for two detections in the same and/or different zones.
- Entry signal mode: the operator gives 3 short beeps when the designated zones are detected.
- 24 user codes, which can be created and changed by the user if allowed by the installer.
- Programmable code properties (e.g. can only arm, disarm, can also be used on the phone).
- Master codes for user settings and separate programmer code.
- The user can also create temporary codes, which are deleted at midnight.
- Quick focus.
- Night (stay at home) arming, for arming only specific zones, with separate commands.
- Warning sounds during the delay times, which can be switched on and off per zone.
- Arming by bypassing zones.
- Automatic arming at a user-settable time, even every day.
- Pre-alarm sound indicating automatic arming, the operator beeps every 6 seconds before arming.
- Night lock: when arming with a certain code, the other codes become ineffective.
- Panic alarm, fire alarm, call for help, forced deactivation signal.
- Forced disarming signal: when disarming, you can trigger a signal on the phone without being noticed.
- Arming and disarming via telephone line with status indication tones.
- Programmable LCD operating function keys.
- All functions can be remotely controlled using a remote control.
- Phone line input and separate output for other phone line devices.
- Accepting an incoming call manually or automatically to a set ring number.
- Bypass answering machine (double call) function if other devices can receive the call.
- Automatic disconnection from other devices when sending a report or alarm signal.
- Event memory for the last 128 alarm events.
- Querying system states and errors.
- Resetting the smoke detector with a separate keyboard shortcut.
- End-of-zone resistors (EOL).
- Sensors with normally closed (NC) or open (NO) contacts can be connected at the same time.
- Uninterrupted power supply by connecting a battery, adjustable charging voltage.
- Continuous system monitoring, local error indication in the event of an error, sending of reports.
- Phone line, siren output, AC power, battery and power output monitor.
- User communicator test and automatic, programmable by day and time.
- 4 different phone line monitoring modes.
- 2 programmable (PGM) outputs, which you can control with almost any event.
- 1500 mA siren output, 500 mA power outputs, 250 mA and 50 mA PGMs.
- CE certification.
- RoHS certificate.